Huaxin Agriculture
Service

Let China's irrigation go global!

VIEW MORE
scroll down

Drip irrigation tape laying case


For example, a field is 100 meters long and 100 meters wide. For planting corn, the seedling distance is 20cm and the planting distance is 40cm.

Based on this data, the number of meters used in the drip irrigation belt can be calculated. Width 100 meters/distance 40cm =250 meters

250 meters/100 meters long = 25,000 meters of drip irrigation belt, then connect the water source to the supervisor, lay the supervisor in the middle of the ground, and then lay the drip irrigation belt on each side, and then open the supervisor hole and use a bypass valve to connect the drip irrigation belt.

(Generally, the choice of drip irrigation belts and the single length of the drip irrigation belts of different specifications and models are recommended. The recommended length of the drip irrigation belts is 0.8L/25-30 pitch. The recommended length of the drip irrigation belts is 200-300 meters/1.1L flow rate. It is generally recommended that a single drip irrigation belt be laid at 150-200 meters/1.38L flow rate. It is generally recommended that a single drip irrigation belt be laid at a length of about 100-150 meters/2L flow rate. The drip irrigation belt is generally recommended to be laid at a length of about 100 meters/2L flow rate. The length of the drip irrigation belt is generally recommended to be about 100 meters/ It is generally recommended to lay a length of about 70 meters for drip irrigation belts with a flow rate of 3L/it is generally recommended to lay a length of about 40-50 meters for drip irrigation belts with a flow rate of 4L)

 

 

(1)Air Valve (2)Main Line (3)Sand Filter (4)Back·wash Valve (5)Pressure Gauge
(6)Ventury (7)Screen Filter (8)NRV (9)Sand Seprator Hydro·Cyclone (10)By Pass valve
(11)Pump (12)Well/Water Source (13)Courtesy:Jain Irrigation (14)Dripper/Emitter (15)Flush valve
(16)Submain Line (17)Polytube/Lateral (18)End Stop (19)Lateral Flush Valve (20)Ball Valve
(21)NRV