Micro spray tape laying
Micro spray tape laying case
Using black micro spray tape as an example, describe the distance of spray amplitude under normal water pressure of 2-3 kilograms
The diameter of the ∅ 25 spray is 2-3 meters
The diameter of the ∅ 40 spray is 4-5 meters
The diameter of the ∅ 50 spray is 5-6 meters
The diameter of the ∅ 63 spray is 6-7 meters
The diameter of the ∅ 75 spray is 7-8 meters
The diameter of the ∅ 90 spray is 9 meters
Using green polymer woven micro spray tape as an example, describe the distance of spray amplitude under normal water pressure of 5 kilograms
The diameter of the ∅ 25 spray is 6-7 meters
The diameter of the ∅ 40 spray is 7-8 meters
The diameter of the ∅ 50 spray is 8-9 meters
The diameter of the ∅ 63 spray is 10-12 meters
The diameter of the ∅ 75 spray is 12-14 meters
The diameter of the ∅ 90 spray is 15 meters
The above water pressure is within the standard range and can be laid according to the following diagram. Based on the water pressure and pipe diameter, it is recommended to choose the laying plan. The length of a single micro spray strip should be within 100 meters
Schematic diagram of the design of micro-spray irrigation system
(There is also a document for precautions for use, please be sure to read it carefully before using it!)

① The irrigation supervisor of our shop needs to be connected to a switch and a small pipe within the pressure range, and cannot be directly connected to a water pump and direct transmission.
② Explosion-proof pipes (fire-fighting pipes, canvas pipes, pumping pipes, plastic-coated pipes, etc. can be directly transmitted under pressure)
③ Three-way switch
④ Bypass switch
⑤ Four-way switch
⑥ T tee
⑦ Electric water pump
Inch unit! Hard pipes and tap water are not available by default!The size of the micro-spray belt hole is 0.5mm-0.8mm, and the number of holes is 0 holes-9 holes.The more holes, the greater the spraying density, the more uniform the spraying, the greater the consumption pressure, and the shorter the working length. The ideal laying length of the micro-spray belt is 10 meters-60 meters, and the ideal spraying distance is 0.2 meters-7 meters!(The actual data is subject to the actual situation on the site such as specifications, pressure, etc. )Personal flexible adjustment, exceeding the pressure will not be responsible for the explosion of the tube, please read the instruction manual carefully! )
Thickness reference (±0.02mm)
1 inch thickened 0.17mm
1 inch pressure-resistant thickening 0.21mm
1 inch extra thick 0.33mm